| 序号 |
作者姓名 |
论文题目 |
发表期刊名称 |
发表时间 |
收录情况 |
| 1 |
贾艳东 |
Experimental Research on the Fracture Properties of Roller Compacted Steel Fiber Recycled Concrete |
Material and Manufacturing(ICMM2011) |
2011 |
EI |
| 2 |
董锦坤，王学志 孙洪军 |
A new Wind Vibration control strategy Based On Active Variable Stiffness |
materials and manufacturing |
2011.09 |
EI |
| 3 |
赵琳 |
Analysis of design method shear strength of RC short corbels |
The 2nd International Conference on Multimedia Technology July 26-28 2011 |
2011.07 |
EI |
| 4 |
赵琳 |
Application of Strut-and-tie Model in Design of Concrete Structural Engineering |
The 2nd International Conference on Multimedia Technology July 26-28 2011 |
2011.07 |
EI |
| 5 |
毕重 |
Impact of Chopped Continuous Basalt Fiber on Flexural Toughness of Self-compacted Concrete |
The 2nd International Conference on Multimedia Technology July 26-28 2011 |
2011.07 |
EI |
| 6 |
刘华新 |
Application of Fuzzy Comprehensive Evaluation inthe Analysis of Shearing Capacity of Deep Beam |
ICMT2011 |
2011.07 |
EI |
| 7 |
刘华新 |
Bearing Performance Analysis Based on ANSYS ofDeep Beams with Opening |
ICMT2011 |
2011.07 |
EI |
| 8 |
周超杰，刘华新 |
Experimental Research on Axial CompressionPerformance of Square Section Concrete ColumnConfined by FRP |
ICMT2011 |
2011.07 |
EI |
| 9 |
刘华新 |
Experimental Research on Concrete Confined by Width and Spacing of Straps of GFRP sheets |
ICEIE2011 |
2011.09 |
EI |
| 10 |
刘华新 |
Modality Analysis Based on FEM of RC Deep Beams with Opening |
ICEIE2011 |
2011.09 |
EI |
| 11 |
刘敬宇，刘华新 |
Bearing Performance Analysis Based on ANSYS of Continuous Deep Beams with Opening |
ICEIE2011 |
2011.09 |
EI |
| 12 |
张丹，赵薇 |
Experimental Study on Simplified Thermo-technical Calculation for Evaporative Coolers |
2011IEEE 2ND INTERNATIONAL CONFERENCE ON COMPUTING,CONTROL AND ENGINEERING |
2011.08 |
EI |
| 13 |
张士轩，马天翼 任铁真 袁忠勇 |
Zirconium ribonu- cleotide surface fu- nctionalized mes-Oporous SBA-15 m-aterials with high capacity of CO2 capture |
（美） Chemical Engineering Journal, 2011(171): 368~372 |
2011.06 |
SCI |
| 14 |
Wei Zhao, Gjalt Huppes, Ester van der Voet |
Eco-efficiency for greenhouse gas emissions mitigation of municipal solid waste management: A case study of Tianjin, China |
Waste Management |
2011.03 |
SCI |
| 15 |
Wei Zhao |
Comparative Environmental Assessments of Hospital Waste Management systems |
Proceeding of 2011 5th International Conference on Bioinformatics and Biomedical Engineering |
2011.05 |
EI |
| 16 |
Wei Zhao, Qun Zhang |
Solid Waste Management in Tianjin City: Status and Challenges |
Proceeding of 2011 5th International Conference on Bioinformatics and Biomedical Engineering |
2011.05 |
EI |
| 17 |
weiwei hongjun sun |
Application in Light Steel Composites in Floors |
The 2nd International Conference on Multimedia Technology(ICMT 2011) |
2011.07 |
EI |
| 18 |
Qu Yandong |
Temperature distributions across the explosive welding interface |
Combustion, Explosion, and Shock Waves |
2011.01 |
SCI |
| 19 |
Yandong Qu,Xiaojie Li,Zheng Zhao, Guilei Sun |
Titania Nanocrystalline Prepared by Detonation Method and Calculation of Detonation Parameters |
Propellants, Explosives,Pyrotechnics |
2011.02 |
SCI |
| 20 |
Qu Yandong,Li xiaojie, Yan Honghao |
Heat Transfer Analysis of the Micron-scale Agglomerates of TiO2 Precursor during the Detonation Process |
Advanced Materials Research |
2011.08 |
EI |
| 21 |
Lihong Zhao, Hongjun Sun |
Study on the Degradation of Cotton Pulp Black Liquor in a Bubble-column Reactor |
The 2011 International Conference on Electric Technology and Civil Engineering |
2011.04 |
EI |
| 22 |
Lihong Zhao, Hongjun Sun |
Breeding of high dye-decolorization strain by UV mutagenesis |
2011 International Conference on Consumer Electronics, Communications and Networks |
2011.04 |
EI |
| 23 |
Lihong Zhao, Hongjun Sun |
Comparative Study of Two Types of Alkali Lignin from Different Origin |
Advanced Materials Research |
2011.09 |
EI |
| 24 |
Hongjun Sun, Lihong Zhao |
Experimental Study of Settlement Characteristics of Bioreactor Landfill |
2011 International Conference on Consumer Electronics, Communications and Networks |
2011.04 |
EI |
| 25 |
Hongjun Sun, Lihong Zhao |
Experimental Study on Strength of Connections to Concrete Filled Tubular in Fire |
Advanced Materials Research |
2011.09 |
EI |
| 26 |
Aoshuang Tian |
Influence of Different High Temperature and Heated Time on Properties of Concrete |
ICMM2011 |
September 7-9, ICMM 2011 |
EI |
| 27 |
高艳娇 |
Cadmium and cobalt removal from heavy metal solution using oyster shells adsorbent |
CECNET2011 |
2011年 |
EI收录 |
| 28 |
高艳娇 |
Landfill leachate treatment by electrocoagulation |
MACE2011 |
2011年 |
EI收录 |
| 29 |
郭鹏飞，王学志，韩英仕 |
A hybrid genetic algorithm for structural optimization with discrete variables |
ICICIS 2011 |
2011.09 |
EI |
| 30 |
焦学英 |
Research on Stress-Strain relationship model of Concrete Prism Confined by GFRP |
Materials and Manufacturing |
2011.09 |
EI |
| 31 |
Xiangqing Kong,Chengwei Wu |
Micronano structure and mechanics behavior of mosquito’s proboscis biomaterials with applications to microneedle design |
Advanced Materials Research |
2011.01 |
EI |
| 32 |
朱朝艳Chaoyan Zhu,Jinkun Dong,Xuezhi Wang,Jingyu Liu |
Improved Genetic Algorithm for Structure Shape Optimization Design of Mixed Discrete Variables |
The 2nd International Conference on Mechanic Automation and Control Engineering |
2011.07 |
Ei检索号：
20114314454618 |
| 33 |
Li,Cheng Ying;Zhang,Jin |
Design and Experimental Analysis on Characteristic of the Magnetostrictive Turning Process Tool-post |
International conference on Electric Information and Control Engineering 2011 Vol3 p2066-2068 |
2011 |
EI |
| 34 |
Li,Cheng Ying;Zhang,Jin;Wei,Wei |
Mechanism Analysis of Magnetostrictive Turning for Piston Skirt Processing |
Advanced Materials Research vols.189-193(2011)p2134-2138 |
2011 |
EI |
| 35 |
Hongyan Liu Jingang Qi |
The Effect of Mirture Paramerer on the Properties of SCC |
materials and manufacturing |
2011.09 |
EI |
| 36 |
张丹，李成英 |
Infrared Smoke Online Automatic Monitoring System of Multi Components of Stationary Pollution Sources |
2011 3rd International Asia Conference on Informatics in Control, Automation and Robotics |
2011.12 |
EI |
| 37 |
孟多，王立久 |
Characterization and Service Performance of Fatty Acid/PMMA Shape-Stabilized Phase Change Material |
Journal of Donghua University(English Edition) |
2011.02 |
EI |
| 38 |
王学志，张小刚，孙荣书，黄志强 |
考虑长轴方向相邻裂纹影响的双向间隔诱导缝等效强度模型 |
混凝土 |
2011.08 |
核心 |
| 39 |
王学志，徐宗超，田傲霜，何秀斌，张玉梅 |
碾压混凝土诱导缝等效强度试验的有限元分析 |
混凝土 |
2011.07 |
核心 |
| 40 |
徐宗超（研究生），王学志，毕重，李洋 |
碾压混凝土诱导缝断裂性能试验分析 |
混凝土 |
2011.03 |
核心 |
| 41 |
贾艳东 |
碾压再生混凝土断裂性能试验研究 |
四川建筑科学研究 |
2011.05 |
核心 |
| 42 |
毕重 |
碾压混凝土名义断裂韧度尺寸效应公式适用性的试验探讨 |
混凝土 |
2011.03 |
核心 |
| 43 |
张士轩，张士波 王耀明 |
离心电熔法制造大口径不透明石英玻璃管的研究 |
《硅酸盐通报》 |
2011.03 |
核心 |
| 44 |
张士轩 |
新型无机–有机超分子化合物{(HINO)6·(P2W18O62)·14H2O}的合成、结构及性质 |
《分子科学学报》 |
2011.05 |
核心 |
| 45 |
张玉梅 |
基于有效裂纹扩展量的不同形式诱导缝等效强度模型对比研究 |
混凝土 |
2011.01 |
核心 |
| 46 |
赵丽红, 孙洪军 |
糙皮侧耳降解碱木素的动力学研究 |
化工环保 |
2011.06 |
核心 |
| 47 |
赵丽红, 孙洪军, 高艳娇, 金若菲 |
超声-生物法联合处理棉浆黑液的研究 |
工业安全与环保 |
2011.04 |
核心 |
| 48 |
田傲霜，王学志 |
裂缝切口形式对混凝土楔入劈拉试件断裂韧度的影响 |
混凝土 |
2011年第2期（总第256期）：4-6 |
核心 |
| 49 |
田傲霜，王学志 |
混凝土楔入劈拉试件预制裂缝类型对断裂能的影响 |
混凝土 |
2011年第8期（总第262期）：67-69 |
核心 |
| 50 |
孙志屏、李深田 |
库伦理论的主动土压力非线性分布特征 |
地下空间与工程学报 |
2011.06 |
核心 |
| 51 |
孟多，王立久 |
单/多层定形相变蓄热板系统的传热性能和调温效果研究 |
辽宁工业大学学报自然科学版(核心层次） |
2011.12 |
核心 |
|
|
|
|
|
|
| 序号 |
姓名 |
获奖名称 |
获奖时间 |
获奖单位 |
专利类型或获奖级别 |
| 1 |
贾艳东，孙志屛 |
钢骨刚性能再生混凝土组合梁性能研究 锦州市科技进步一等奖(2) |
2011.12 |
辽宁工业大学（2） |
锦州市科技进步一等奖 |
